ESP8266 to attack a WiFi network using Deauther && || Evil-Twin AP method. (1 Viewer)

[casper8080]

FEATURES :​

• Deauthentication of a target WiFi access point
• Evil-Twin AP to capture passwords with password verification against the og access point
• It can do both attacks at the same time, no toggling of the deauther is required

Install using Arduino IDE​

1. Install Arduino IDE
2. In Arduino go to File -> Preferences add this URL to Additional Boards Manager URLs -> https://raw.githubusercontent.com/SpacehuhnTech/arduino/main/package_spacehuhn_index.json
3. In Arduino go to Tools -> Board -> Boards Manager search for and install the deauther package
4. Download and open PhiSiFi with Arduino IDE
5. Select an ESP8266 Deauther board in Arduino under tools -> board
6. Connect your device and select the serial port in Arduino under tools -> port
7. Click Upload button

8. How to use:​

• Connect to the AP named WiPhi_34732 with password d347h320 from your phone/PC.
• Select the target AP you want to attack (list of available APs refreshes every 30secs - page reload is required).
• Click the Start Deauthing button to start kicking devices off the selected network.
• Click the Start Evil-Twin button and optionally reconnect to the newly created AP named same as your target (will be open).
• You can stop any of the attacks by visiting 192.168.4.1/admin while conected to Evil-Twin AP or by resetting the ESP8266.
• Once a correct password is found, AP will be restarted with default ssid WiPhi_34732 / d347h320 and at the bottom of a table you should be able to see something like "Successfully got password for - TARGET_SSID - PASSWORD
  • If you power down / hard reset the gathered info will be lost

Click to read more...